高输出功率小电压实验室检测装置仪（耐脉冲实验室检测装置仪）-（求算机调节）

High voltage low current tester (arc resistance tester) - (computer control)

车辆明称：耐电弧试验机

Product name: electric arc resistance tester

成品款式：NDH-A

Product model: NDH - A

无法标：GB/T 1411-2002《固状绝缘层板材耐高降低电流量脉冲电池充电的试验报告》（就是指IEC  61621-1997）及ASTM D495等规范的让设计构思产生的，并合乎IEC 149、UL 746A等疲劳试验做法

Meet the standards: GB/T 1411-1411 "solid insulating material resistant to high voltage low current arc discharge test" (equivalent to IEC 61621-1997) and the requirements of standards such as ASTM D495 design and manufacturing, and conform to the IEC 149, UL 746 a test method, etc

一 概述

一An overview of the

重要适合超范围及的功能：

本实验机是是以适适用三相异步电机、电嚣元件和家廷用电户器元件等该行业的低压电工用塑胶板材、硅胶粘合剂胶和接地电阻层漆等接地电阻层原文件的耐电孤效能方面评定标准，主适用固态接地电阻层原文件如：塑胶板材、透明膜、硅胶粘合剂、白云母、淘瓷、夹层玻璃、接地电阻层油、接地电阻层漆、硬纸板等材质的耐电孤效能方面测评；

本耐压机由算起机把控好正常运作，也可以表现现在调查操作报告室动态及调查操作报告室时间间隔，调查操作报告室结速后并保存图片现在调查操作报告室数据文件，并可直接打印.标准单位检测评估报告。

Main scope of application and features:

This machine is in accordance with the applied in motor, electrical appliances and household appliances and other industries with varnish insulation materials such as plastic, resin adhesive and the arc resistance evaluation, the main used for solid insulating material such as plastic, film, resin, mica, ceramic, glass, insulating oil, insulating paint, such as cardboard medium arc resistance test;

This testing machine controlled by computer operation, can display the current experimental condition and experimental time, after the experiment, and save the current experimental data and can be printed. Standard experiment report 

二 功能特点

1 超声波焊接机为横竖一体式结构特征，下端为操作方法体系，上端为疲劳湿热。

2 本成品确认*新智能化调节技木，确认确定过程（IEC或ASTM）可智能实施做实验的时候，并在PC上显现检验流程和后果。

3 **的性能很好，抗干忧实力强，检查准确更高。

二：Functional features：

1 this machine is up and down a body structure, lower for the operating system, the upper part of test cases.

2 this product USES the latest intelligent control technology, through the selection process (IEC) or ASTM test can be automatically, and displayed on the computer and the test process and results.

3 good safety performance, strong anti-interference ability, high test precision. 

三 主要技术参数

1 弧光通断耗时误差值：少于 ±10ms

2 调压器存储量：2kVA

3 额定负载校正交流电压：12.5kV

4 疲劳试验电压电流计算精度：±3%

5 电流量操控精密度：±10%  直流电检测的误差：1.5%

6 电级对试件有压力：（0.5±0.05）N

7 电极原料原料：钨棒

8 电级相应：（6.35±0.1）mm（IEC）

               （6.0±0.1）mm（ASTM）

9 施用生态环境水温：（23±2）℃

10 用环保对空气湿度的：（50±5）%

11 24v电源：220V±5%  50Hz  10A

12 检测    方式 ：   国家标准下载/美标/10 mA 累计/20 mA 接连/30 mA接连/40 mA不断

13 测试流程有以下几点：

Three main technical parameters：

Error: 1 arc on-off time less than plus or minus 10 ms

Transformer capacity: 2 kva

3 test voltage rating: 12.5 kV

4: test voltage accuracy + / - 3%

5 current control accuracy: plus or minus 10% current measuring accuracy: 1.5%

6 electrode pressure on sample: (0.5 + 0.5) N

7 electrode materials: tungsten rods

8 electrode distance: 6.35 + / - 0.1 mm (6.0 + 0.1) mm (IEC) (ASTM)

9 using the environment temperature (23 + 2) ℃

10 use environment humidity: (50 + 5) %

Power supply: 220 v + 5% for 50 hz 10 a

Test method: beautiful mark / 10 gb / 30 mA mA continuous / 20 mA continuous/continuous / 40 mA continuous

13 test procedure is as follows:

Procedures section of the arc current

MA arc on-off time s the program s test total duration time s

IEC 61621 ASTM D495

1 1/8 10 s on 7/8 s broken 1/4 7/4 break 60 s 60 s

2 10 1/4 "s pass 3/4 s 1/4 3/4 break 60 s 120 s

3 to 10 1/4 "s make a quarter s break a quarter of a quarter break 60 s 180 s

4 consecutive 10 to 60, 240

5 20 consecutive 60, 300

30 consecutive 6 to 60, 360

7 consecutive 40 to 60, 420 

四  配置

Four configuration：

Serial number name number note

01 arc resistance tester

02 a electrode system

03 electrode bearing a set

04 a set of power cable

05 ground put a rod

06 milliammeter current one

7 a set of computer measurement and control software

08 specimen holder a

09 electrode distance standard 2 blocks

Standard 2 blocks of 10 Angle

11 ceramic pieces 2 pieces

12 one brand inkjet printer

13 1 computer brand

14 1 instruction manual

15 1 certificate

五 产品的型號：

NDH-A    耐脉冲校正仪-微机把控

NDH-B    耐电孤校正仪-触摸式屏控制

Five product model:

NDH - A arc resistance tester - microcomputer control

NDH - B arc resistance tester - touch screen control
ASTMD495耐高压低电流电弧放电试验机详情可以随时来电咨询！